Product ID:K-PRENE ADHESIVE PART B, KPA-204
MSDS Date:01/01/1986
FSC:8040
NIIN:00N041673
Kit Part:Y
MSDS Number: BSQXC

Emergency Phone: 612-345-2598

Info Phone: 612-345-2598

Cage: 4Z205

Telephone: 612-345-2598

Cage: 4Z205

POLYAMIDE

CAS: 68082-29-1

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRIMARY IRRITANT. ING 1:MILDLY
IRRITATING TO SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:FLUSH LIBERALLY
W/WATER FOR AT LEAST 15 MINUTES. CONSULT MD. SKIN:WASH W/MILD SOAP
& W ATER. REMOVE & LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS.

Spill Release Procedures:WEAR RUBBER GLOVES & WIPE UP W/ABSORBENT
MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:CLOSE CONTAINER AFTER USAGE & STORE IN
COOL, DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NOT NORMALLY REQUIRED.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:EYE WASH, SAFETY SHOWER. NORMAL INDUSTRIAL
WORK CLOTHES.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health
% VOLAT:0.5 MAX (WT).

Spec Gravity:0.97
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
CARBON MONOXIDE, CARBON DIOXIDE, VARIOUS HYDROCARBONS & OXIDES OF
NITROGEN.

Waste Disposal Methods:INCINERATE OR LANDFILL ACCORDING TO LOCAL, STATE
& FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.